PA 6C Heat Stabilised
Additives in the form of high temperature resistant colorants, heat and UV stabilisers allow this material to retain better mechanical properties in applications operating at higher temperatures. The inorganic dye used to produce HS BLUE's distinctive colour conforms to the specifications required by the Japanese market for cast nylon.
Key features
- Better performance at higher operating temperatures
- Heat stabilised colourants
- UV stabilised
- Improved mechanical properties
- Excellent chemical resistance properties
- Good PV and load bearing capabilities
- Conforms to Japanese standards
- Fatigue resistant
Properties
Property |
Unit of measure |
Value |
Tensile Strength | Mpa | 80 |
Elongation at Break | % | >20 |
Modulus of Elasticity | MPa | 4000 |
Impact Strength | kj/m² | 5.40 |
Compressive Strength | MPa | 95 |
Shear Strength | MPa | |
Shore Hardness | D Scale | 84 |
Co-efficient of Friction | μ | 0.15 |
Water Absorption @ 23 Deg C | % | 7.00 |
Service Temperature Intermittent | ᵒC | 180 |
Service Temperature Continuous | ᵒC | 115 |
Melting point | ᵒC | 220 |
Thermal Conductivity | W/m.ᵒC | 0.26 |
Dielectric Strength | kV/mm | 25 |
Volume Resistivity | Ω.cm | 10¹³ |
Surface Resistivity | Ω | 10¹² |
Arc Resistance | Sec | |