Solid lubricant filled 66E
The solid lubricant filled 66E has been created for demanding sliding applications. They are used in mechanical systems and apparatus engineering. They are polymer alloys suitable for structural parts. Solid lubricant filled products have to withstand the highest loads. Both formulations have extreme tribological properties. They are wear resistant with minimal coefficients of friction.
Key features
- Used in highly stressed sliding and guide elements
Properties
| Property |
Unit of measure |
Value |
| Tensile Strength | Mpa | 80 |
| Elongation at Break | % | >20 |
| Modulus of Elasticity | MPa | 3900 |
| Impact Strength | kj/m² | 6.00 |
| Compressive Strength | MPa | 95 |
| Shear Strength | MPa | |
| Shore Hardness | D Scale | 84 |
| Co-efficient of Friction | μ | 0.39 |
| Water Absorption @ 23 Deg C | % | 7.00 |
| Service Temperature Intermittent | ᵒC | 170 |
| Service Temperature Continuous | ᵒC | 110 |
| Melting point | ᵒC | 220 |
| Thermal Conductivity | W/m.ᵒC | 0.26 |
| Dielectric Strength | kV/mm | 25 |
| Volume Resistivity | Ω.cm | 10¹³ |
| Surface Resistivity | Ω | 10¹² |
| Arc Resistance | Sec | |