Antistatic Acetal Copolymer
Static electricity is dissipated along the surface and this product does not need humidity or other surface treatments to achieve the antistatic performance. The excellent technical value of surface resistivity of 1010 Ω and volume resistivity of 109Ω .cm are offering cutting edge properties for new applications in various industries. The permanently antistatic property is not influenced by humidity and there is no migration taking place. The product is not containing carbon and therefore prepared for clean room applications. The excellent POM-C (Acetal copolymer) properties as high impact strength, low wear and dimensional stability are not much changed.
Applications for electrical conductive and antistatic Acetals: Parts in use where electrical discharge in operation is a problem.
Used in
- Electric, electronic and semiconductor industries
- High speed printing
- Material handling,
- Mining
- Mobile phone production plants
- Robotics
Applications for use
- Bearings
- Circuit boards
- Coil bodies
- Hard disk drives
- Insulators
- Integrated circuits
- Relay and transformer housings
- Slide pads
Properties
| Property |
Unit of measure |
Value |
| Tensile Strength | Mpa | 40 |
| Elongation at Break | % | >30 |
| Modulus of Elasticity | MPa | 1380 |
| Impact Strength | kj/m² | 10 |
| Compressive Strength | MPa | |
| Shear Strength | MPa | |
| Shore Hardness | D Scale | 75 |
| Co-efficient of Friction | μ | |
| Water Absorption @ 23 Deg C | % | |
| Service Temperature Intermittent | ᵒC | 140 |
| Service Temperature Continuous | ᵒC | 90 |
| Melting point | ᵒC | 165 |
| Thermal Conductivity | W/m.ᵒC | |
| Dielectric Strength | kV/mm | 14 |
| Volume Resistivity | Ω.cm | 10⁹ |
| Surface Resistivity | Ω | 10¹⁰ |
| Arc Resistance | Sec | |